Anatomical landscape of oral squamous cell carcinoma: A single cancer center study in UAE.

Objectives: This study aimed to present demographic and clinicopathological aspects of OSCC identified in Pathology service in the UAE over a 13-year period and compare these findings to a cohort of 523 cases of Head and neck squamous cell carcinoma using the Cancer Genome Atlas's cBioPortal database (http://cbioportal.org). Material and methods: Histological examination of all hematoxylin and eosin-stained slides and assessment of all demographic and clinical information from laboratory records were performed on all OSCC diagnosed between 2005 and 2018. Results: Males made up 71.4% of the sample of 231 OSCCs that were evaluated. The patients' average age was 55.38 years. The two most prevalent afflicted sites were the anterior two-thirds of the tongue (57.6%) and the cheek (28.1%). The most prevalent site among smokers were the floor of mouth, cheek, and jaw bones. There was a link between tumor size and numerous anatomical subsites that was shown to be highly significant. OSCC in the FOM was associated with a 25% mortality rate. Patients with OSCC of the anterior tongue and cheek had the best prognosis, with only 15.7% and 15.3% of patients dying during follow-up. Conclusion: The present investigation found a correlation between the diverse clinicopathological characteristics of the various anatomical subsites in OSCC. Different anatomical subsites also displayed varying degrees of gene mutation.

Morphometric analysis of odontoid process among Arab population: a retrospective cone beam CT study.

Objective: This study aims to evaluate the feasibility of using cone beam computed tomography (CBCT) scans to assess the odontoid process diameter in the Arab population and to determine whether one or two cortical screws can be used for treating odontoid fractures. Methods: The odontoid process of 142 individuals aged 12-75 years, including 72 males (mean age: 35.5) and 70 females (mean age: 36.2), were analyzed using CBCT scans. The sagittal and coronal CBCT views were used to evaluate the antero-posterior (AP) and transverse diameters of the odontoid process. Results: Males had substantially bigger transverse and AP diameters of the odontoid process than females (p < 0.05 & P < 0.01 respectively). Among the sample, 97 individuals (67.4%) had external transverse diameter (METD) of less than 9 mm which is slightly bigger than that of Indians and 48 individuals (31.83%) had enough room for two 3.5 mm or two 2.7 mm screws as their METD was more than 9 mm like that of Greek and Turkish. Age had no significant impact on the morphometric measurements of the odontoid process. Conclusion: More than sixty percent of the sample had METDs of less than 9 millimeters, indicating that a single 4.5-mm Herbert screw may be suggested for fixing fractured odontoid processes in the Arab population.

Influence of students' self-directed learning on situational interest: A prospective randomised study.

INTRODUCTION: Evaluate the effectiveness of a newly developed interactive 3D head and neck software package on students' situational interest and knowledge acquisition. MATERIAL AND METHODS: A prospective randomised controlled study was carried out on two groups of dental students, 25 each. The study group "A" received education on head and neck anatomy using an interactive 3D software package. The same content was delivered to the students in group B via the standard PowerPoint presentation. The same lecturer delivered the educational modules over 80 min. Throughout the course of learning, the students completed a situational interest questionnaire, every 20 min. At the end of the session, each participant completed a knowledge acquisition test. RESULTS: Wilcoxon signed-rank sum test showed a clear difference in the pattern of situational interest between the two groups; a statistically significant drop in the interest in the head and neck was noted amongst the students after 40 min in group B (p < .05). An opposite pattern was detected amongst the students in group A. No statistically significant differences were detected in the knowledge acquisition between the two groups. CONCLUSION: The 3D software package of the head and neck anatomy has augmented the students' situational interest and improved their knowledge acquisition. However, further research is required to evaluate students' perception and experience of its use before it is widely generalised in universities and educational institutes.

Effect of different teaching/learning approaches using virtual patients on student's situational interest and cognitive load: a comparative study.

BACKGROUND: Virtual Patients (VPs) have been receiving considerable attention in medical education as an authentic learning and teaching approach. The study aimed to evaluate the effect of using different approaches of conduction of virtual patients (VPs) on students' cognitive load and situational interest. METHODS: The study is an experimental study. Two different cohorts have participated during the academic year 2019/2020 and 2020/2021. The first cohort (Group 1) was exposed to a lecture followed by an independent VPs session, and the second cohort (Group 2) was exposed to a collaborative VPs session. The situational interest and Cognitive load were compared between the two groups. All sessions are about one topic related to maxillofacial trauma. RESULTS: Findings showed that there was no significant difference between the median score of the situational interest at repeated time points during the Collaborative VPs (Group 2). However, in group 1, there was a significant difference between the median score of situational interest at repeated time points during independent VPs where the lowest score was found to be at the end of the session. Also, results showed that the collaborative VPs (Group 2) showed a high median score of situational interest than both lecture and independent VPs (Group 1). Furthermore, the study showed that there is no significant difference in the intrinsic cognitive load among the three sessions. However, the extraneous cognitive load was low in collaborative VPs (Group 2) than in both lecture and independent VPs sessions (Group 1). CONCLUSION: The use of VPs in a collaborative interactive learning activity is more effective than its use as an independent learning activity in enhancing students' situational interest and reducing cognitive load. However, giving independent VPs after the lecture with the same topic is considered a limitation of the study as this can affect the situational interest of the students by filling their gab of knowledge.

Prolonged Inhibition of Streptococcus mutans Growth and Biofilm Formation by Sustained Release of Chlorhexidine from Varnish Coated Dental Abutments: An in Vitro Study.

Background: It has been confirmed that bacterial biofilm covering dental implants is the main microbial source causing preimplant infectious and inflammatory diseases. The purpose of this study was to evaluate the antibacterial/antibiofilm effect of chlorhexidine, incorporated into a sustained-release varnish of chlorhexidine (SRV-CHX) coating, on dental abutments. Materials and Methods: Three kinds of dental abutments were used: a high-performance semi-crystalline engineering thermoplastic polyetheretherketone (PEAK) healing abutment, a titanium healing abutment, and a titanium permanent abutment. These abutments were coated with SRV-CHX or SRV-placebo and exposed daily to fresh cultures of Streptococcus mutans. The effect of SRV-CHX on S. mutans growth on agar plates was studied by measuring the zone of inhibition (ZOI) around each tested abutment every day for a period of 36 days. Biofilm formation on the SRV-CHX/placebo-coated abutments was detected using confocal laser scanning microscopy (CLSM) and high-resolution scanning electron microscopy (HR-SEM), energy dispersive X-ray analysis (EDX), and monitored by crystal violet (CV) staining. Results: SRV-CHX-coated abutments 2 and 3 were able to inhibit S. mutans growth for 34 days, while abutment 1 inhibited growth for 32 days. Abutment-associated biofilm formation was notably inhibited by SRV-CHX coating after 13 days of incubation with S. mutans. Finally, the biofilm formed around SRV-CHX-coated abutments was completely inhibited up to 12 days of abutment exposure to S. mutans. Conclusion: Coating of dental abutments with SRV-CHX demonstrated long-term effective inhibition of S. mutans growth and biofilm formation on the abutment surface.

Characteristics of Suture Materials Used in Oral Surgery: Systematic Review.

BACKGROUND: The aim of this review was to evaluate the most used suture materials with regards to their inflammatory response, their bacterial adhesion, and their physical properties when used to close oral wounds. METHODS: Four databases (PubMed, Scopus, Dentistry & Oral Sciences, and OVID) were searched to retrieve relevant studies from January 1, 2000, to January 31, 2020. RESULTS: Out of the 269 articles, only 13 studies were selected as they were relevant and met the systematic review's protocol. These studies showed that almost all suture materials studies (catgut, polyglycolic acid [PGA] sutures, nylon, expanded polytetrafluoroethylene, and silk sutures) caused bacterial adherence and tissue reaction. In nylon and chromic catgut, the number of bacteria accumulated was lowest. Silk and nylon were found to be more impacted than catgut and PGA in terms of physical characteristics such as tensile strength. PGA, on the other hand, was said to be the most susceptible to knot unwinding. CONCLUSIONS: Following an oral surgical operation, all sutures revealed varied degrees of irritation and microbial accumulation. Nonresorbable monofilament synthetic sutures, however, exhibited less tissue response and less microbial accumulation.

A study on the association between accessory maxillary ostium and maxillary sinus mucosal thickening using cone beam computed tomography.

BACKGROUND: Accessory maxillary ostium (AMO) has a major role to play in the aetiology of maxillary sinusitis. Mucosal thickening is one of the key radiographic features of chronic maxillary sinusitis. The aim of this study was to identify the location of the AMOs and investigate the association between Mucosal Thickening [MT] and AMO using Cone Beam Computed Tomography [CBCT]. METHODS: CBCT scans of 400 maxillary sinuses from the records of 200 patients who seeked various dental treatments at the Thumbay Dental Hospital, Gulf Medical University, Ajman, United Arab Emirates were evaluated. The incidence, anatomical position and maximal length of accessory maxillary ostia (AMO) in the maxillary antrum were reviewed using CBCT by two examiners. The association between MTs and AMOs were also analysed. RESULTS: Among the 200 CBCT scans, 131 belonged to male patients and 69 scans belonged to female subjects within the age group of 18-65 years (mean age 41.32 years). AMOs were found in 142 maxillary antra (35.5 %). The inter-observer reliability for using CBCT to detect AMO was (k = 0.83). There was no significant difference in the frequency of AMOs when the age (P = 0.19) and gender (P = 0.54) distribution were considered. Sinuses with AMOs, showed significantly greater frequency of MTs (p = 0.001). AMOs with maximal length of less than 1mm were most commonly observed (51.40 %). AMOs with larger greater maximal length were associated with higher degrees of MT. The location of the AMOs, were not affected by the degree of MT. CONCLUSIONS: The study demonstrates a clear association between degree of MT and occurrence of AMO in the maxillary sinus. However, the location of the AMO is independent of the degree of the MT. There is a greater probability of finding an AMO in the maxillary sinus if the MT in the sinus is more than 3 mm.

Analysis of inferior nasal turbinate width and concha bullosa in subjects with nasal septum deviation: a cone beam tomography study.

BACKGROUND: In individuals with nasal septal deviation (NSD), compensatory hypertrophy of the nasal turbinates occurs as a protective mechanism of the nasal passage from dry and cold air. NSD associated nasal turbinate hypertrophy is usually recurrent, requiring repetitive imaging. Therefore, a multiplanar imaging modality with a low radiation dose is best suited for long-term follow-up of this condition. This study aimed to evaluate the association of width of inferior turbinates and presence of concha bullosa with the degree of NSD using Cone beam computed tomography (CT). METHODS: The CBCT scans of 100 patients with NSD were selected as per convenience sampling and were evaluated by two maxillofacial radiologists. The width of the non-hypertrophied inferior turbinate (NHT) on the convex side of the NSD, and hypertrophic inferior turbinates (HT) on the concave side of the NSD were measured at three locations. The septal deviation angle (SDA) and the presence of concha bullosa (CB) were determined. RESULTS: A significant difference was observed in the anterior, middle, posterior, and mean widths between HT and NHT (p < 0.001). There was a significant difference in the widths of the HT and NHT among different types of NSD. A strong positive correlation (r = 0.71, p < 0.001) was found between SDA and the mean width of the HT. Age (P = 0.71) and gender (P = 0.65) had no significant difference among different types of NSD. Regression analysis revealed that the presence of CB (p = 0.01) and middle width of the HT (p < 0.001) are significant predictors of SDA and type of NSD. CONCLUSION: The results of the present study reveal that the middle width of the HT and the presence of CB influence the degree of NSD. The present study results recommend the use of CBCT as a substitutive low radiation dose imaging modality for evaluation of NSD, CB, and associated inferior turbinate hypertrophy.

Cone-beam computed tomography characterization of the intraosseous vascular canal in the lateral wall of the maxillary antrum.

OBJECTIVES: : The purpose of the study was to assess the occurrence, location, and dimensions of the intraosseous vascular canal in the lateral wall of the maxillary antrum using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: In this retrospective study, we examined 400 CBCT scans from our archive of patients who had earlier reported to a dental teaching hospital in the United Arab Emirates. The prevalence, location, and dimensions of the lateral antral intraosseous canal (LAIC) in the maxillary antrum were evaluated by 2 examiners using standardised methods. A third examiner was consulted in cases of disagreement. RESULTS: The prevalence of LAIC was 62.3% (249 maxillary antra) among the study population. The mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC in the posterior maxillary region was 19.83±3.12 mm. There was a significant difference (P=0.05) between the maxillary molar and premolar regions in mean distance from the most inferior point of the alveolar bone and the inferior border of the LAIC. There was no statistically significant difference in mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC between dentulous and edentulous areas (P=0.1). The G3-intrasinusal type canal less than 1mm in diameter was the most common type of LAIC. CONCLUSION: This study established the approximate location of the LAIC in a United Arab Emirates cohort, which will assist the oral surgeon in selecting the appropriate site for sinus lift procedures with reduced risk of surgical hemorrhage.

COVID-19 Vaccine Acceptance Among Dental Professionals Based on Employment Status During the Pandemic.

The COVID-19 pandemic spread rapidly across the globe, leading governments to impose prolonged lockdowns on both movement and commerce. Although lockdowns decrease the rates of novel infections, they can have devastating consequences on the economy and employment levels. One of the most severely affected sectors during this crisis has been dental medicine. Dental professionals are uniquely exposed to environments with high levels of occupational hazards, conferring additional risks of viral exposure and transmission. We analyzed 506 anonymous questionnaires completed by dentists and residents regarding acceptance of a future potential SARS-CoV-2 vaccine. Our results demonstrate a statistically significant correlation between the individual's unemployment rate and their willingness to inoculate with a SARS-CoV-2 vaccine when it becomes available. This information can be used to predict trends of vaccine acceptance or rejection based on economic burden during the COVID-19 pandemic by different sectors as part of the preparedness toward global vaccination programs.

Application of a Cone-Beam Computed Tomography-Based Index for Evaluating Surgical Sites Prior to Sinus Lift Procedures-A Pilot Study.

OBJECTIVES: Radiography-based indices can help surgeons perform detailed examinations of the surgical site and predict the surgical difficulty of cases. We aimed to develop and validate a novel CBCT-based index that can predict the surgical difficulty of sinus-augmentation procedures. MATERIALS AND METHODS: In the first stage, five experienced dental specialists performed a review of the literature and closed group discussions and designed the novel index. In the next stage, the index was validated. CBCT scans of 30 patients scheduled for sinus-augmentation procedures were evaluated and assigned presurgical CBCT evaluation scores (PSCESs) by five examiners. Subsequently, one oral surgeon performed sinus augmentation using the lateral antrostomy technique and assigned surgical difficulty scores (SDSs) to each of the 30 cases along with 2 observers. The PSCESs and SDSs were statistically analysed to determine the interrater reliability and validity of the index. RESULTS: The interrater agreement of the PSCES among the five presurgical evaluators was 0.85. The PSCES of the five evaluators had highly significant correlation (P < 0.001, r = 0.68 to 0.76) with the SDS. Regression analysis revealed that for every unit increase in the PSCES, there is 0.46 to 0.57 increase in the SDS value. CONCLUSION: The results of this pilot study revealed that a novel CBCT-based index can be used as a reliable tool for predicting the surgical difficulty of sinus-augmentation procedures. However, the novel index needs to be tested on a larger sample of patients and evaluators for a more concrete validity and reliability.

Transformation to learning from a distance.

This article was migrated. The article was marked as recommended. COVID-19 is a strong disruptive force that has not only influenced our global health and economy but also has changed the way we teach, learn and communicate with our students. It has disturbed the regular education pattern and the standard practices that we adapted over many years. The challenge is beyond changing the mode of delivering instructions from face to face to online. The real challenge is in creating a culture that supports the adoption of innovative practices, which require different skills and competences from the teacher, student, mentor and administrator, and at the same time maintaining the quality of the products. In other words, changing what was exceptional to be the norm over a short period of time. This article describes our approach "Open Learning" in managing such change. Our over-riding philosophy is about ensuring that students have high quality resources, and the enthusiasm and learning skills to benefit from them. At the same time we want to optimise the use of the available online applications and learning management system so that their use is within the capability of our faculty. This paper describes the evolution of our approach and the principles upon which it has been based. Our experiences over the past few months will transform the educational experience of our students over the years to come.

United by Hope, Divided by Access: Country Mapping of COVID-19 Information Accessibility and Its Consequences on Pandemic Eradication.

Many government websites and mobile content are inaccessible for people with vision, hearing, cognitive, and motor impairments. The COVID-19 pandemic highlighted these disparities when health authority website information, critical in providing resources for curbing the spread of the virus, remained inaccessible for numerous disabled populations. The Web Content Accessibility Guidelines provide comparatively universally accepted guidelines for website accessibility. We utilized these parameters to examine the number of countries with or without accessible health authority websites. The resulting data indicate a dearth of countries with websites accessible for persons with disabilities. Methods of information dissemination must take into consideration individuals with disabilities, particularly in times of global health crises.

Assessment of alveolar bone level and furcation involvement in periodontal diseases using dental cone-beam computed tomography (CBCT): a systematic review / Avaliação do nível ósseo alveolar e envolvimento da furca em doenças periodontais usando a Tomografia computadorizada de feixe cônico odontológica: uma revisão sistemática

The advent of CBCT has contributed significantly to dental imaging. In the field of periodontics, CBCT provides a multi-planar view to assess the alveolar bone in three dimensions. This helps the dentist to make measurements at any location that could significantly improve periodontal diagnosis. Objective: The aim of this systematic review is to evaluate the accuracy of using CBCT in the assessment of alveolar bone level and furcation involvement in periodontal diseases. Material and Methods: PubMed, LILACS and Google Scholar databases were searched for literature related to the application of CBCT in periodontal diseases. Keywords used for the search were CBCT, furcation involvement, measurement and their synonyms. Results: Fifteen full-text English language research papers were eligible for the systematic review using the PRISMA guidelines. Conclusion: From the results of the systematic review it can be concluded that conebeam computed tomography imaging technique offers significantly reliable images of the furcation involvement and height of the alveolar bone. (AU)

O advento da Tomografia computadorizada de feixe cônico (TCFC) contribuiu significativamente para a imageologia. No campo da periodontia, a TCFC fornece uma visão multiplano para avaliar o osso alveolar em três dimensões. Isso ajuda o dentista a fazer medições em qualquer local que possa melhorar significativamente o diagnóstico periodontal. Objetivo: O objetivo desta revisão sistemática foi avaliar a precisão do uso da TCFC na avaliação do nível ósseo alveolar e do envolvimento da furca em doenças periodontais. Material e Métodos: As bases de dados PubMed, LILACS e Google Scholar foram pesquisadas na literatura relacionada à aplicação da TCFC em doenças periodontais. As palavras-chave utilizadas para a pesquisa foram TCFC, envolvimento da furca, mensuração e seus sinônimos. Resultados: Quinze trabalhos de pesquisa em inglês com texto completo foram elegíveis para a revisão sistemática usando as diretrizes do PRISMA. Conclusão: A partir dos resultados da revisão sistemática, pode-se concluir que a técnica de imagem por tomografia computadorizada de feixe cônico oferece imagens significativamente confiáveis do envolvimento da furca e da altura do osso alveolar.(AU)

Effect of Steam Heat Sterilization on the Accuracy of 3D Printed Surgical Guides.

INTRODUCTION: Steam heat sterilization could be one of the factors that affects the dimensional accuracy of surgical guides, leading to an error during guided implant surgery. OBJECTIVE: The purpose of this study was to investigate the effect of steam heat sterilization on the dimensional changes of surgical guides. MATERIALS AND METHODS: A total of 27 surgical guides, which were made by either Formlabs printer (Formlabs Inc., Somerville, MA) or Simplant (DENTSPLY Implants NV, Hasselt, Belgium), were scanned using an intraoral scanner before and after sterilization. The dimensional changes at the center of the implant sleeves were analyzed using the computer-aided design interactive software for 65 implant sites before and after steam heat sterilization at 121°C for 20 minutes. RESULTS: There was no significant difference between the mean x, y, and z axes of the center of the sleeves when measured before and after sterilization (P values were 0.37, 0.24, and 0.29, respectively). Nonparametric analysis showed no significant difference between the mean deviations of either surgical guide (P = 0.908). CONCLUSION: Steam heat sterilization has a nonsignificant effect on the dimensional changes of the tested surgical guides.

Delayed Healing of Tooth Extraction Sockets After Vascular Endothelial Growth Factor Inhibition by Bevacizumab.

PURPOSE: This study aimed to explore the effect of the chemotherapeutic agent bevacizumab on the extraction socket healing process in New Zealand rabbits. MATERIALS AND METHODS: The animals received intraperitoneal bevacizumab treatment for 6 consecutive weeks (3 mg/kg per week). The right mandibular first premolar was extracted in the second week of the experiment, and the jaw bone containing the socket tissues was harvested at the end of the treatment period. The healing of the removed socket was analyzed histologically and radiographically using a micro-computed tomography scan. RESULTS: Quantitative morphometric and histologic assessments of the healing process of the extraction sockets in rabbits showed a marked (P ≤ .05) decrease in the bone volumetric mass after angiogenesis suppression by bevacizumab therapy (n = 5) compared with the control group (n = 5). CONCLUSIONS: The results of this study indicate the physiological significance of angiogenesis in extraction socket healing. Moreover, this study highlights the risks and precautions that should be considered in clinical practice in patients undergoing targeted chemotherapy.

Influence of surgeon experience on the accuracy of implant placement via a partially computer-guided surgical protocol.

PURPOSE: There is always a tension between allowing novice trainees to place implants independently and the need to achieve accurate functional and esthetic outcomes. The aim of this study was to measure the influence of surgeon experience on the accuracy of implant placement using a teeth-supported surgical guide via a partially guided surgical protocol. MATERIALS AND METHODS: Twenty partially edentulous patients were randomly allocated to expert and novice surgeon groups. Implant drilling and placement for the two groups were performed through a flapless surgical technique using surgical guides following a partially guided surgical protocol. The study primary independent variable was the surgeon experience, while the outcome variable was the accuracy, which was measured based on the differences in implant angulations preoperatively and postoperatively. Two-way analysis of variance (ANOVA) was applied to find the influence of surgeon experience, implant size, and the interactive effect of surgeon experience and implant size on the angular deviation. RESULTS: A total of 40 implants were inserted in 7 men and 13 women. There was no significant difference (P = .453) in the mesiodistal deviation between the expert and novice groups. In a buccolingual direction, the expert group performed more accurate implant placement (3.7 ± 3.35) compared with the novice surgeons (8.5 ± 6.3). CONCLUSION: The level of surgeon experience affects the accuracy of implant placement using a teeth-supported surgical guide; therefore, the use of computer-guided surgery via a partially guided protocol does not completely compensate for the level of operator experience. However, such surgical guide might be used in a whole task training of novice surgeons, as it can bridge the gap between simulation training in vitro and freehand surgery in a clinical setting.

Collaborative use of virtual patients after a lecture enhances learning with minimal investment of cognitive load.

BACKGROUND: The use of virtual patients (VPs), due to their high complexity and/or inappropriate sequencing with other instructional methods, might cause a high cognitive load, which hampers learning. AIM: To investigate the efficiency of instructional methods that involved three different applications of VPs combined with lectures. METHOD: From two consecutive batches, 171 out of 183 students have participated in lecture and VPs sessions. One group received a lecture session followed by a collaborative VPs learning activity (collaborative deductive). The other two groups received a lecture session and an independent VP learning activity, which either followed the lecture session (independent deductive) or preceded it (independent inductive). All groups were administrated written knowledge acquisition and retention tests as well as transfer tests using two new VPs. All participants completed a cognitive load questionnaire, which measured intrinsic, extraneous and germane load. Mixed effect analysis of cognitive load and efficiency using the R statistical program was performed. RESULTS: The highest intrinsic and extraneous load was found in the independent inductive group, while the lowest intrinsic and extraneous load was seen in the collaborative deductive group. Furthermore, comparisons showed a significantly higher efficiency, that is, higher performance in combination with lower cognitive load, for the collaborative deductive group than for the other two groups. CONCLUSION: Collaborative use of VPs after a lecture is the most efficient instructional method, of those tested, as it leads to better learning and transfer combined with lower cognitive load, when compared with independent use of VPs, either before or after the lecture.

The effectiveness of integration of virtual patients in a collaborative learning activity.

BACKGROUND: Virtual patients (VPs) have been recently integrated within different learning activities. AIM: To compare between the effect of using VPs in a collaborative learning activity and using VPs in an independent learning activity on students' knowledge acquisition, retention and transfer. METHODS: For two different topics, respectively 82 and 76 dental students participated in teaching, learning and assessment sessions with VPs. Students from a female campus and from a male campus have been randomly assigned to condition (collaborative and independent), yielding four experimental groups. Each group received a lecture followed by a learning session using two VPs per topic. Students were administrated immediate and delayed written tests as well as transfer tests using two VPs to assess their knowledge in diagnosis and treatment. RESULTS: For the treatment items of the immediate and delayed written tests, females outperformed males in the collaborative VP group but not in the independent VP group. CONCLUSION: On the female campus, the use of VPs in a collaborative learning activity is more effective than its use as an independent learning activity in enhancing students' knowledge acquisition and retention. However, the collaborative use of VPs by itself is not enough to produce consistent results across different groups of students and attention should be given to all the factors that would affect students' interaction.

Pharyngeal pack placement in minor oral surgery: A prospective, randomized, controlled study.

We conducted a prospective, randomized, controlled study to investigate the influence of pharyngeal pack placement on postoperative nausea, vomiting, and throat pain after minor oral surgery. Our study group was made up of 80 patients-45 men and 35 women, aged 19 to 52 years (mean: 27.3)-who underwent a minor oral surgical procedure under general anesthesia. Patients were randomly assigned to one of three groups: 20 patients who received a pharyngeal pack under videolaryngoscopic guidance (video guidance group), 20 who had a pack placed blindly (blind insertion group), and 40 patients who received no pack at all (control group). Postoperative nausea occurred in only 4 patients (20%) in the blind insertion group (p < 0.007). No patient experienced postoperative vomiting. Postoperative throat pain occurred in all 20 video guidance patients (100%), in 17 of the blind insertion patients (85%), and in 20 of the controls (50%). The difference between the controls and each of the two pack groups was statistically significant (p < 0.006); the difference between the two pack groups was not significant.